Double Glazing Lock Repairs
Good locks on your doors and windows can stop burglars from entering your home. In general, they don't enjoy breaking glass or squeezing through windows that are not closed.
Some owners of double glazing, however, have experienced problems with their window or door lock following the installation. These issues can be resolved without the need for new double glazing.
Broken or damaged locks
If your uPVC door or window lock is damaged or broken and requires a locksmith, they can repair it for you. They will be able to repair the striker plates, hinges, and locks on your double-glazed. They can also adjust the cylinder to correct any misalignment that may be causing your handle to function properly.
If the key fits in the lock but it won't turn or is difficult to insert then the mechanism may be locked up. This could be due to grime or dirt getting stuck inside the mechanism. If this is the case, it may be possible to clean the lock and lubricate it. Make use of a dry lubricant, like graphite or teflon and not oil, as oil attracts dirt and cause it to stick to the inside mechanism. After lubricating the lock, you must insert the key and attempt to turn it. The lubricant should get into the mechanism and the lock should spin smoothly.
Screws that are loose within the lock mechanism can be another cause of a faulty lock. They may loosen and fall out or break off completely which can stop the lock from working correctly. A screwdriver is a tool to tighten these screws but care must be taken not to tighten them too much because this could cause damage to the internal components.
A broken lock can be hazardous for you and your family. This is especially the case if you have children. It is possible for them to open the door without your knowledge and thus give them access to your home. If you're worried that this might happen, a vetted professional locksmith can help secure the double-glazed doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing and can repair all kinds of damaged and broken mechanisms such as handles, cylinders, handles and lock systems on uPVC windows and doors. We can also alter the locking system on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always required.
Handles that are broken or damaged
As part of their overall security package many double-glazed windows have a multipoint lock. This is a great option for those who are worried about potential burglars trying to gain entry to their home. Ask your locksmith for antilift locks. These can be installed alongside your existing locks and can ensure that your windows are securely closed.
Handle locks are usually damaged or fail. They are the first component that criminals will employ to open your window. The good news is that this is among the easiest parts to repair.
Modern uPVC handles and aluminum handles come with the multi-point locking mechanism referred to as Espagnolette, which is designed to ward off forced entry. double glazing repairs near me is available as an option on new uPVC windows. Older style uPVC and aluminium handles can be upgraded to lock systems that shoot bolts also as an optional feature on all new double-glazed windows.
It is crucial to fix the handle as soon as you can if it's damaged. The damaged handles could stop the window from closing properly and permit drafts to get in. It could also be a vulnerability that thieves can take advantage of, putting your family's belongings and you at risk.
To repair the damaged mechanism, first gain access to the window frame and remove the broken handle. The gearbox that opens the handle is then located and the model is identified so that a replacement can be found that is in line with the profile of the internal window frame mechanisms.
After the mechanism has been repaired the handle can be put back together using the original screws. However, we suggest replacing them with longer screws as they will provide a more secure fit. The final step is to seal the handle using an opaque sealant. This will protect it from further corrosion. Once you've completed this step the window should be functioning again at a fraction of the cost of replacing it.
Hinges that are broken or Faulty
If your windows do not close properly, you could experience draughts, a weakening of your home's security and an increased risk of damp or water damage. Window hinges that break or fail to function properly are a common problem and can be fixed easily.
If you have a uPVC window that isn't able to open or close it's likely that the hinges are damaged or broken and require replacement. While a lot of window companies require you to purchase a whole new window to resolve this simple issue We can replace the damaged hinges and save you money.
Window hinges are often damaged after repeated use, or they could be weakened due to corrosion over time. If you find a broken hinge, it's important to take measures to prevent further damage by being careful not to push the window to open or close.
Identifying your hinge type will help you find the correct parts to fix it. Maco, Mila and Roto are all manufacturers of window hinges. It's best to consult an expert in this regard to ensure that you don't make the mistake of purchasing parts that aren't compatible with your current hardware and could cause further damage.
A damaged hinge can be a huge problem for your uPVC window and doors. They can be a major source of noise and could also allow water to enter your windows.
To fix this issue, first check that the pin barrel on both hinge halves is aligned. If it's not, tap the head pin with an hammer to create a small bend in the hinge barrel. This will help to keep the pin in the right position. Then, ask a friend to hold the door as you remove the hinges and hinges from both the doorjamb as well as the door. Replace the hinges and then install screws using glue. After the glue is drying, put a secure hold on the hinges by using weights or clamps.
After you have fixed your hinges, you can put the door back in place. You could also reattach the handle. It is a good idea to replace the screws with the same length of wood dowels as the original screw so that they are in line with each the other.
Broken or damaged glass
uPVC Windows can be damaged in time, despite the fact they are extremely effective in keeping out the cold and conserving warmth. This can be the case with broken or damaged glass as well as defective locks. If not taken care of, it can be a costly problem. It can also detract from the aesthetics of your home and can lead to loss of insulation, which is why it's crucial to repair any damage as quickly as you can.
You can repair the crack in your glass yourself if you have the proper tools and techniques. Make sure the area around the broken glass is free of debris to ensure that fragments don't cause injury or cause a trip hazard. Then, you must remove any pieces of broken glass and dispose of them appropriately. Then, apply masking tape to the entire area to stop shards from scattering and sticking to your skin when you move them. Pre-fitting the glass pane prior to gluing it in place is an ideal option when you have a window that has two panes. This will ensure you have enough space to finish your project.
Before applying the glue wipe the surface of the broken frame and glass with a an unclean, dry cloth. Follow the curing and application instructions, which may vary from one product to the next. You may need to clamp the broken glass using clamps that are lightweight and designed to support fragile materials, depending on the angle.
After the adhesive has fully cured, carefully reinstall the glass inside the window frame, making sure it's flush with the edges of the frame, and there are no gaps between the glass and the window sash. Avoid flexing the glass as you install it again, as this could weaken the seal. This could result in condensation or water infiltration.
Get in touch with a professional glazier, such as O'Brien(r), to arrange an exchange if your glass window has been completely broken. If you leave broken glass unattended, it could cause danger to pets and children and is why it's important to act fast.